Surebonder Interchangeable Hot Glue Gun Nozzles – 4 Pack Includes Adapter, Small & Large Round Nozzles, Flat Nozzle – Made of

(8 customer reviews)

Brand Surebonder Style Trigger Item Weight 0.05 Pounds Power Source Corded Electric COMPATIBLE GLUE GUNS – These interchangeable nozzles are compatible with the DT-360F, DT-3100F, L-270, H-270, DT-270, H-327F, PRO2-60, DT-750, and HE-750W. 3 ALUMINUM SPECIALTY NOZZLES – Includes nozzle adapter and 3 aluminum specialty nozzles (small round, large round, and flat) for various repair…


This versatile set lets you adjust the shape and size of your hot glue bead upon application. Compatible with full-size glue guns in the following glue gun lines: Ultra Series (DT-360F, DT-3100F), Essentials Series (L-270, H-270, DT-270), Specialty Series (H-327F), and the Professional Series (PRO2-60, DT-750, HE-750). Orifice sizes are 0.076 inches for the small round nozzle and 0.120-inch for the large round nozzle. The flat nozzle has a 0.160-inch width and a 0.045-inch height. Keep this handy nozzle set in your toolbox so you can easily adjust the size of your glue stream for greater precision in adhesion.

Additional information

Part Number


Item Weight

‎0.8 ounces

Product Dimensions

‎9.1 x 9.1 x 9.1 inches

Item model number




Power Source

‎Corded Electric

Item Package Quantity


Batteries Included?


Batteries Required?




Date First Available

February 22, 2018


‎FPC Corp

8 reviews for Surebonder Interchangeable Hot Glue Gun Nozzles – 4 Pack Includes Adapter, Small & Large Round Nozzles, Flat Nozzle – Made of

  1. Butterfly

    He loves them, they interchange with the tips on the hot glue gun I got himAnother hit……

  2. Kelley

    I’ve always had problems with my glue gun expressing too much glue, but since I put the smaller cap on its so much easier and I have more control. Works great!!

  3. Diana L

    These are easy to swap out and they provide versatility for use of your glue gun.

  4. Hennakoi

    I purchased these nozzles to use with my new Surebonder Dt-3100F dual temperature glue gun. The green silicone cover and the nozzle at the bottom of the photo are the original items that were on the gun. The long one on the glue gun in the photo is the small round replacement nozzle.The instructions tell you to heat the gun for 5 minutes then unplug before changing nozzles. They don’t tell you why but this is due to the fact that the nozzle on the gun is “glued” to it while the gun is cold. You need to warm up the gun so the glue in the gun is pliable and you are able to remove the current tip. DO NOT try and force the tip off cold!! (In the last photo you can see how the glue hardens in the tip.)The instructions tell you to use heat resistant gloves, a wrench, long sleeve shirt, etc etc.I had none of these (except glasses). I removed the green silicone tip cover, then warmed the gun as instructed then used pliers to turn the bolt holding the original nozzle on. DO NOT TOUCH THIS!!! IT IS HOT!! 🔥I then attached the new tip to the nozzle adapter and attached them to the glue gun using my pliers and not over tightening.Voila! Ready to plug in and use.I was not able to figure any way to reattach the green silicone nozzle tip so I just left it off. The narrow tip was what I needed to get into some small areas of a Mould I was using to make flowers. It worked well.I have not used the other two tips in the package yet. I gave this a four star because I could not replace the green silicone tip protector and the replacement nozzle dripped ever so slightly, where as I had no drips with the original nozzle, and I think the instructions on changing the tips should be clearer. All in all a good product and I would buy it again.

  5. Rosemary

    They were great until the SureBonder glue gun started clogging. I had the glue gun less than 6 months. I don’t think the tips were the cause of the gun clogging.

  6. Shopper

    Great 5 star product! A must have for crafters. Glue gun is well made and the interchangeable glue tips makes.this a crafters must have.

  7. Joan Lenze

    Unfortunately, for me this product was defective. I should have tested it right away. We missed the 30 day return product by 2 days, so we now are stuck with an adapter that does not work! Lesson learned-:)So amazingly, I called the company &they said they would make it right & are sending us a new part.

  8. Amazon Customer

    I was so excited to be able to replacement the nozzle and it didn’t work. The original nozzle won’t come off and the case of the glue gun broke.

Add a review

Your email address will not be published. Required fields are marked *